Configure Internet Connection in BSNL Teracom Modem
To configure Internet connection in Teracom modem follow the steps below.
1. Login to BSNL Teracom Wireless Modem
Type 192.168.1.1 on the address bar of your browser to login Teracom modem.
Default BSNL modem user name and password is :
User Name: admin
Password : admin
Click OK. Now you will be on BSNL modem configuration page.
2. Click on Configuration Tab
Now click on Internet Connection to configure Internet in BSNL Teracom modem.
3. Remove old connections configured in BSNL mode
If you see any connections already made in the modem ,select the connection and remove them.
4. Add new connection in BSNL modem
Now click on the add button on the bottom of the page to create a new connection.
Now add following parameters in Internet Connection Configuration.
PVC Name: PVC0
VCI : 35
Service Category : UBR with PCR
Keep all other information the default and click Next.
5. Configure Connection Type
Now select PPP Over Ethernet (PPPoE) and LLC/ SNAP.
Now click Next.
6. Configure WAN IP Settings in BSNL Modem
Select Obtain IP Automatically. Make sure NAT and Default Route is checked.
Click on Next.
7. Set User Name and Password in BSNL Modem
Now type the user name and password provided by BSNL and click Next.
Now you will come to the summary page.
Click on Apply.
8. Reboot BSNL Modem
Click on Admin tab and then click on reboot.
From drop down menu select Last and click on Reboot. Now wait 1 minute to let the modem reboot. After this close the window and check your Internet connection.
Wireless Setting
1). Click on Configuration tab and then click on Wireless Network.
2). Click MAC Address Filter
3). Click Drop Down Menu Select MAC Auth
Select Option Disabled
Then Click Apply
Your Modem Is working Properly
4 comments:
thank you thanks a lot.... daily i was calling BSNL people for my WiFI configuration and they couldnt fix it, now its very simple... thank you web top
thank u so much...
Sir, My modem is of model TDSL300W2
When i open the config. page (192.168.1.1) the username & password as ' admin ' is not accepting by it.,Can you help me out...
Hello,i am using Teracom modem TDSL300W2.But i am unable to login for configration .when i Open the browser and type the IP address 192.168.1.1 and username :admin and password :admin .it comes
Protected ObjectThis object on the RomPager server is protected
Please help me how can i login.
11 • Reply•Share ›
Avatar
Rachit Mohan • 3 years ago
it is probably your system is taking 192.168.1.1 as your default IP address. You nee to change it to something else. follow the below steps
open network and sharing center
>select the current connection and click on status
> then click on properties and select ipv4 and click on its properties
>click on use the following IP address and put 192.168.1.9
SUBNET: 255.255.255.0
Default gateway: 192.168.1.8
DNS: 8.8.8.8 & 8.8.4.4
Click OK but DO NOT click on validate setting.
Post a Comment